In addition to the already well developed ahp.cylinder accessories, AHP is releasing a new range of accessories for hydraulics, the ahp.hydraulic accessories. This includes valves, gearwheel flow dividers as well as the latest innovation, the “Last Chance Filter”.
Pressure piece
Pressure piece for screwing pressure piece with spherical face into the piston rod. The pressure surface is designed as a spherical cap and is hardened with 56+2 HRC. The hardening depth is max. 0.5 mm.
Pressure piece for screwing into the piston rod. The pressure surface is designed as a spherical cap and is hardened with 56+2 HRC. The hardening depth is max. 0.5 mm.
Pivots
Pivot GAD is primarily used with DIN Standard cylinder.
The swivel head GE is primarily used with our AHP Standard cylinders. Attention: If you use this pivot with one of our cylinders, the piston rod end may have to be adjusted!
The fork swivel head GEG is primarily used with our AHP Standard Cylinders. Caution: When you use this pivot with one of our cylinders, you may need to adjust the end of the piston rod.
The pivot Sa is primarily used with our AHP Standard Cylinders. Attention: If you use the pivot with one of our cylinders, the piston rod end may have to be adjusted!
Pivot SAD is primarily used with DIN Standard Cylinder.
Caution: When you use this pivot with one of our cylinders, you may need to adjust the end of the piston rod.
The pivot Si is primarily used with our AHP Standard Cylinders.
Caution: When you use this pivot with one of our cylinders, you may need to adjust the end of the piston rod.
Fork head, fits on the end of the piston rod of our DIN Standard Cylinders.
Clutch
The coupling and counter piece exclude the effect of transverse forces on the piston rod. The counter piece is suitable for the AHP Merkle couplings.
The coupling is installed in the standard internal thread. It can be used to create a loose connection between the piston rod and the moved mass. An appropriate groove should be created in the counter piece. AHP can offer a suitable counter piece for each coupling – this can be found under Accessories.
The coupling and counter piece exclude the effect of transverse forces on the piston rod. The counter piece is suitable for the AHP Merkle couplings.
Clevis
Clevis LD for the Si joint. Dimensions according to ISO 24556.
Clevis LD for the Si joint. Dimensions according to ISO 24556.
Clevis for cylinders with rotation pin. Dimensions according to ISO 8133.
Clevis with a rotation area of 180°. Dimensions according to DIN8132, shape A.
Clevis with a rotation area of 90°. Dimensions according to DIN8132, shape B.
Clevis for cylinders with rotation pin. Dimensions according to ISO 8132.
Installation Tool
Layer thickness 0.05mm
Aids for fine adjustment
Place the coating sheet between the cylinder and mould
Installation cone
Installation sleeve
Calibration sleeve
Face spanner
Customised open-jaw spanners for our block cylinders.
Standard parts
Parallel keys according to DIN 6885 – Form A
Suitable for our block cylinders
The set screw is installed in the standard internal thread of our cylinders. Please ensure that the set screw is not subjected to torsional stress or any other retention.
Series connection box
4-way & 8-way
Single-UND & double-UND
LED operating display
Realisation of simplified series connections of cylinder sensors
for PNP/NPN, NO and NC sensors
Integrated steel measuring plate for testing sensors
Automatic switch-off after approx. 30 s idling
Power supply from a single 9 V battery
Visual and acoustic signal
Note: Switch is not suitable for two-wire and Desina sensors.
INJECTION MOuLDING COMPONENTS
CYTEC-UK – Precision Cylinder & Mould Technology
CYTECUK specializes in high-precision hydraulic cylinders, clamping systems, milling heads, and motor spindles for various industrial applications, including tool & mold making, the automotive industry, and aerospace.
Core pull and locking cylinders are specialized hydraulic cylinders used in injection moulding machines for the precise movement and securing of moulds
CYTEC specializes in hydraulic cylinder technology, offering advanced cylinder and clamping systems, as well as essential machine components for mold construction and machining.
ServoMold specializes in servo-electric automation solutions for injection moulds. They provide components like unscrewing devices and linear drives to enhance precision and efficiency in mould construction.
